Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Before replacing any parts try cleaning all the Wheel Speed Sensors and sensor's gear, and clear the code. If the light comes back you may have to replace the sensor.
To diagnose the P0500 2011 Nissan Pathfinder code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.
The almost 0 km/h (0 MPH) signal from vehicle speed sensor is sent to ECM even when vehicle is being driven.
When the sensor rotor rotates, the magnetic field changes. It converts the magnetic field changes to current signals (rectangular wave) and transmits them to the Anti-lock Brake System (ABS) Actuator and Electric Unit (Control Unit). The vehicle speed signal is sent to the combination meter from the ABS Actuator and Electric Unit (Control Unit) by Controlled Area Network (CAN) communication line. The combination meter then sends a signal to the Engine Control Module (ECM) by CAN communication line.
Need more information on how to fix the P0500 2011 Nissan Pathfinder code? Get Access to Factory Service Manuals
Get the P0500 2011 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0500 2011 Nissan Pathfinder code? Have you replaced any parts?
Any information is appreciated. Thanks