Using your hands, grasp the door armrest trim and pull upward using a considerable amount of force until detached. Unscrew the
exposed bolt.
Click image to see it larger
2
Pry off trim piece directly behind door opening handle using a flat screwdriver stick. Unscrew the exposed bolt.
Click image to see it larger
3
Pry off trim piece located on door grab handle using PGF stick. Unscrew the two (2) exposed bolts.
Click image to see it larger
4
Pry off trim piece that houses the window controls using a flat screwdriver stick and disconnect all connectors.
Click image to see it larger
5
Disengage the light trim at bottom of door from door trim using a flat screwdriver stick. Disconnect the light harness
connector. (Step is required if applicable)
6
Using your hands, grasp the entire door trim at its rear edge and pull trim apart from door sheet metal using considerable amount
of force to disengage the plastic panel fasteners.
Note
Hold the door panel up and do not allow it to hang by harnesses or door locking cables.
Click image to see it larger
7
Disengage the two (2) door lock metal cables from the door trim. Set door trim aside in a safe location.