Need A Repair Shop?
Find local automotive repair shops in your area.
CarZone Auto | Nissan and Infiniti Service Center
Do-It-Yourself Nissan Tutorials Home | Nissanhelp.com DIY DIY
 
Frontier
 
Engine Control System
 
2000-2012 Nissan Frontier Clear Mixture Ratio Self-Learning Control Data

2000-2012 Nissan Frontier Clear Mixture Ratio Self-Learning Control Data

Models:
  • 2000 Nissan Frontier
  • 2001 Nissan Frontier
  • 2002 Nissan Frontier
  • 2003 Nissan Frontier
  • 2004 Nissan Frontier
  • 2005 Nissan Frontier
  • 2006 Nissan Frontier
  • 2007 Nissan Frontier
  • 2008 Nissan Frontier
  • 2009 Nissan Frontier
  • 2010 Nissan Frontier
  • 2011 Nissan Frontier
  • 2012 Nissan Frontier

Mixture Ratio Self-Learning Control

The mixture ratio feedback control system monitors the mixture ratio signal transmitted from air fuel ratio (A/F) sensor 1. This feedback signal is then sent to the Engine Control Module (ECM). The ECM controls the basic mixture ratio as close to the theoretical mixture ratio as possible. However, the basic mixture ratio is not necessarily controlled as originally designed. Both manufacturing differences (i.e., mass air flow sensor hot wire) and characteristic changes during operation (i.e., fuel injector clogging) directly affect mixture ratio.

Accordingly, the difference between the basic and theoretical mixture ratios is monitored in this system. This is then computed in terms of "injection pulse duration" to automatically compensate for the difference between the two ratios.

Fuel trim refers to the feedback compensation value compared against the basic injection duration. Fuel trim includes short term fuel trim and long term fuel trim.

Short term fuel trim is the short-term fuel compensation used to maintain the mixture ratio at its theoretical value. The signal from air fuel ratio (A/F) sensor 1 indicates whether the mixture ratio is RICH or LEAN compared to the theoretical value. The signal then triggers a reduction in fuel volume if the mixture ratio is rich, and an increase in fuel volume if it is lean.

Long term fuel trim is overall fuel compensation carried out long-term to compensate for continual deviation of the short term fuel trim from the central value. Such deviation will occur due to individual engine differences, wear over time and changes in the usage environment.

Instructions

  • 1
    Start engine and warm it up to normal operating temperature.
  • 2
    Turn ignition switch OFF.
  • 3
    Disconnect mass air flow sensor harness connector, and restart and run engine for at least 3 seconds at idle speed.
  • 4
    Stop engine and reconnect mass air flow sensor harness connector.
  • 5
    Make sure Detected Trouble Code (DTC) P0102 is displayed.
  • 6
    Erase the DTC memory. (This could be done by disconnecting the car battery for 30-45 min or with a scanner)
  • 7
    Make sure no codes are stored in the ECM.
  • 8
    Run engine for at least 10 minutes at idle speed.
Nissan Frontier DIY Projects
Modifications
Nissan Modification
Engine & Transmission
Nissan Engine and Transmission
Air Bag & Body Exterior/Interior
Nissan Air Bag, Body Exterior and Interior
OEM Accessories Installation Guides
Nissan Frontier OEM Accessories Installation Guides
Electrical & Audio
Nissan Electrical and Audio
Heater & Air Condition
Nissan Heater and Air Condition
Suspension, ABS, Brakes & Tires
Nissan Brake and Suspension
Engine Control System
Nissan Engine Light
Nissanhelp.com Knowledgebase
Nissan Frontier Bulletins Nissan Frontier Campaigns/Recalls Nissan Frontier Reference Specifications Tips & Articles
Nissan Frontier Service Manuals Nissan Frontier Owner's Manuals Nissan Frontier Navigation system Manuals Nissan Frontier Towing Guides
Nissan Frontier Warranty Booklets Nissan Frontier Detailing Tips and Articles Nissan Frontier Maintenance Schedules Nissan Frontier Forums
Nissan OBDII Code Chart Find a Shop Glossary of Automotive Terms Fuel Consumption Estimator