Click image to see it larger

1. Remove the front door finisher. See: 2003-2007 Front Door Panel Removal Procedure

2. Operate the power window main switch to raise/lower the door window until the glass mounting bolts can be seen.

3. Remove the glass mounting bolts.

Click image to see it larger

4. Raise up the door glass and hold with a suction lifter or anything that can hold the window up.

Click image to see it larger

5. Remove the mounting bolts, and remove the module assembly.

6. Disconnect the harness connector for the module assembly, and unclip the harness from the back.

Click image to see it larger

7. Install in the reverse order of removal.

Nissan Murano DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	OEM Accessories Installation Guides
Electrical & Audio	Heater & Air Condition	Suspension, ABS, Brakes & Tires	Engine Control System