1. Press the switch to the UP/CLOSE position to tilt the sunroof up fully. When the sunroof reaches the full tilt UP position it will back up a few millimeters and stop.

2. Release the UP/CLOSE switch.

3. Within 5 seconds of releasing the UP/CLOSE switch, press and hold the UP/CLOSE switch again. The sunroof will move to the full open position and back to the closed position.

NOTE: If the UP/CLOSE switch is released anytime during this teaching process, all learned profile data will be discarded.

4. Release the UP/CLOSE switch. Do not turn the ignition OFF for at least two seconds. The sunroof is now initialized.

Nissan Sentra DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	OEM Accessories Installation Guides
Electrical & Audio	Heater & Air Condition	Suspension, ABS, Brakes & Tires	Engine Control System