2005-2010 Nissan Xterra Door Mirror Replacement Procedure

Instructions

Removal

• 1
  Angle the mirror all the way UP
• 2
  Then pull the mirror at the bottom corners as shown in Figure
• -
  This will "snap" the mirror from the actuator.
• Note
  If it is a heated mirror, make sure to disconnect the 2 electric terminals from the glass.
• 
  Click image to see it larger

Installation

• 1
  At the top of the mirror, insert the "holder slides" (hooks) into the grooved cutouts in the actuator.
• Note
  If it is a heated mirror, make sure to connect the 2 electric terminals to the glass.
• 
  Click image to see it larger
• 2
  Then fold the glass DOWN against the actuator.
• 3
  Press (snap) the sections of mirror in place in the order (1, 2, 3, 4) shown in Figure
• -
  A "snap" can be heard when pressing each section to verify it has been fitted correctly.
• 
  Click image to see it larger
• 4
  Use a plastic trim tool to gently lift the lower corners of the mirror to confirm that it is securely snapped into place.
• -
  If the mirror unsnaps when you're doing this check, go back to step 3, above.
• 
  Click image to see it larger

Nissan Xterra DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	OEM Accessories Installation Guides
Electrical & Audio	Heater & Air Condition	Suspension, ABS, Brakes & Tires	Engine Control System