2003-2011 Nissan 350Z - 370Z Throttle Valve Closed Position Learning Procedure

Throttle Valve Closed Position Learning is an operation to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time harness connector of electric throttle control actuator or Engine Control Module (ECM) is disconnected.

Instructions

• 1
  Make sure that accelerator pedal is fully released.
• 2
  Turn ignition switch ON.
• 3
  Turn ignition switch OFF and wait at least 10 seconds
• a
  Make sure that throttle valve moves during above 10 seconds by confirming the operating sound.

Nissan Z DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	OEM Accessories Installation Guides
Electrical & Audio	Heater & Air Condition	Suspension, ABS, Brakes & Tires	Engine Control System